Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
After loosening the mounting screws, then remove the rear door inside handle (A). |
3. |
Installation is the reverse of removal.
|
Checking the coolant level
Check the condition and connections of all cooling system hoses and heater hoses.
Replace any swollen or deteriorated hoses.
The coolant level should be filled between F (Full) and L (Low) marks ...
Injector Drive Box (IDB) Schematic Diagrams
IDB terminal and Inoutput
IDB terminal function
Connector [CLG02]
Pin No.DescriptionConnected to1-?2-?3-?4-?5-?6-?7-?8-?9-?10-?11-?12-?13-?14-?15-?16Injector (Cylinder #3) [Low] control outputI ...
Smart key receiver Repair procedures
Removal
RF Receiver
-
Take care not to scratch the crash pad and related parts
1.
Disconnect the negative(-) battery terminal.
2.
Remove the rear seat.
(Refer to ...