Removal |
1. |
Lift the vehicle and support the fuel tank with a jack. |
2. |
Remove the nuts (A) from fuel tank. |
3. |
Disconnect the fuel filler hose (A). |
4. |
Remove the fuel shut off valve (A). |
Installation |
1. |
Installation is reverse of removal.
|
Inspection |
1. |
Visually check if the valve is are deformed or damaged. |
2. |
Check if the valve spring is oprerated normally. |
ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Two Turn Unlock Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.18 and No.17
terminals when power and ground are connected to the No. ...
Cowl Cross Bar Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Take ...
Yaw-rate and G Sensor Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console.
(Refer the Body - "Floor console")
3.
Disconnect the yaw rate & latera ...