Hyundai Azera: Front Seat Shield Inner Cover Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Using a screwdriver or remover, remove the front seat shield inner cover (A).

3.

Installation is the reverse of removal.

•	Replace any damaged clips.

Front Seat Shield Inner Cover Components and Components Location

Component Location 1. Front seat shield inner cover ...

Front Seat Back Cover Components and Components Location

Component Location 1. Front seat back cover ...

See also:

Components and Components Location
Component Location (1) 1. Head lamp (Low)2. Head lamp (High)3. Position lamp (LED)4. Front turn signal lamp5. Side marker6. Overhead console lamp (General/Panoramaroof)7. Room lamp (General) ...

Spark plugs
Make sure to install new spark plugs of the correct heat range. ...

Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com