Hyundai Azera: Floor Console Assembly Components and Components Location

Components and Components Location

Components 1. Gear knob & Gear boots2. Console upper tray complete3. Center facia side garnish [RH]4. Center facia side garnish [LH]5. Console extension cover [RH]6. Console extension cover [ ...

Floor Console Assembly Repair procedures

Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...

See also:

Operating door locks from inside the vehicle
With the door lock button To unlock a door, push the door lock button(1) to the “Unlock” position. The red mark(2) on the door lock button will be visible. To lock a door, push the door lo ...

Camshaft Position Sensor (CMPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal     • DON'T remove the camshaft position se ...

If the engine stalls at a crossroad  or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...