Replacement |
1. |
Disconnect the damper (B) from the glove box (A) and then remove the glove box lift (C). |
2. |
Remove the filter cover(A) with pushing the knob. |
3. |
Replace the air filter (B), install it after making sure of the direction of air filter. |
4. |
Installation is the reverse order of removal.
|
CVVT Oil Control Valve (OCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the specifi ...
Front Muffler Components and Components Location
Components
1. Front muffler
...
ICM (Integrated Circuit Module) Relay Box Specifications
Specification
Rated voltageDC 12VOperating voltageDC 9 ~ 16VUse of temperature range-30°C ~ 75°CPreserve temperature range-40°C ~ 85°CInsulation resistance100M? MIN. / 500VM
...