- If the temperature inside the car is too high, open the car windows to ventilate
before using the system.
- It is illegal to copy and use MP3/WMA files without permission. Use CDs
that are created only by lawful means.
- Do not apply volatile agents, such as benzene and thinner, normal cleaners
and magnetic sprays made for analogue disc onto CDs.
- To prevent the disc surface from getting damaged, hold CDs by the edges
or the center hole only.
- Clean the disc surface with a piece of soft cloth before playback (wipe
it from the center to the outside edge).
- Do not damage the disc surface or attach pieces of sticky tape or paper.
- Make certain only CDs are inserted into the CD player (Do not insert more
than one CD at a time).
- Keep CDs in their cases after use to protect them from scratches or dirt.
- Depending on the type of CDR/ CD-RW CDs, certain CDs may not operate normally
according to the manufacturing companies. In such circumstances, continued use
may cause malfunctions to your audio system.
✽ NOTICE - Playing an Incompatible
Copy Protected Audio CD Some copy protected CDs, which do not comply with
international audio CD standards (Red Book), may not play on your car audio. Please
note that inabilities to properly play a copy protected CD may indicate that the
CD is defective, not the CD player.
NOTE:
Order of playing files (folders) :
1. Song playing order : to
sequentially.
2. Folder playing order :
❋ If no song file is contained in the folder, that folder is not displayed.
WARNING
- Do not stare at the screen while driving. Staring at the screen for prolonged
periods of time could lead to traffic accidents.
- Do not disassemble, assemble, or modify the audio system. Such acts could
result in accidents, fire, or electric shock.
- Using the phone while driving may lead to a lack of attention of traffic
conditions and increase the likelihood of accidents. Use the phone feature after
parking the vehicle.
- Heed caution not to spill water or introduce foreign objects into the
device. Such acts could lead to smoke, fire, or product malfunction.
- Please refrain from use if the screen is blank or no sound can be heard
as these signs may indicate product malfunction. Continued use in such conditions
could lead to accidents (fires, electric shock) or product malfunctions.
- Do not touch the antenna during thunder or lightening as such acts may
lead to lightning induced electric shock.
- Do not stop or park in parking- restricted areas to operate the product.
Such acts could lead to traffic accidents.
- Use the system with the vehicle ignition turned on. Prolonged use with
the ignition turned off could result in battery discharge.
CAUTION
- Operating the device while driving could lead to accidents due to a lack
of attention to external surroundings. First park the vehicle before operating
the device.
- Adjust the volume to levels that allow the driver to hear sounds from
outside of the vehicle. Driving in a state where external sounds cannot be heard
may lead to accidents.
- Pay attention to the volume setting when turning the device on. A sudden
output of extreme volume upon turning the device on could lead to hearing impairment.
(Adjust the volume to a suitable levels before turning off the device.)
- If you want to change the position of device installation, please inquire
with your place of purchase or service maintenance center. Technical expertise
is required to install or disassemble the device.
- Turn on the car ignition before using this device. Do not operate the
audio system for long periods of time with the ignition turned off as such operations
may lead to battery discharge.
- Do not subject the device to severe shock or impact. Direct pressure
onto the front side of the monitor may cause damage to the LCD or touch screen.
- When cleaning the device, make sure to turn off the device and use a
dry and smooth cloth. Never use tough materials, chemical cloths, or solvents
(alcohol, benzene, thinners, etc.) as such materials may damage the device panel
or cause color/ quality deterioration.
- Do not place beverages close to the audio system. Spilling beverages
may lead to system malfunction.
- In case of product malfunction, please contact your place of purchase
or After Service center.
- Placing the audio system within an electromagnetic environment may result
in noise interference.
AM and FM radio signals are broadcast from transmitter towers located around
your city. They are intercepted by the radio antenna on your vehicle. This signal
is then processed by the radio and se ...
See also:
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. The two Knock Sensor
(KS) are installed inside the V-valley of the cylinder bl ...
Seat Heater Switch Repair procedures
Inspection
Front Seat Heater Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Remove the sea ...
Roll Blind Repair procedures
Removal
1.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
2.
After loosening the mounting screws, then remove the roll blind lower bracket (A).
3.
Remove the roll blind ...