Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the front left wheel guard. |
3. |
Remove the external buzzer (A) after disconnecting the connector. |
Installation |
1. |
Install the buzzer. |
2. |
Install the front left wheel guard. |
3. |
Install the negative (-) battery terminal and check the smart key system. |
Cruise Control Switch Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
2.
Remove the steering wheel.
(Refer to Steering ...
Rail Pressure Sensor (RPS) Schematic Diagrams
Circuit Diagram
...
Vehicle certification label
The vehicle certification label attached on the driver’s (or front passenger’s)
side center pillar gives the vehicle identification number (VIN). ...